My Request List (Authorized Users Only)
Review My ListClose My List
0 item(s) added

My bookmarks

You have not yet added any products to your product list.

AGSE Product Form

AGSE-E176-G03-LTLS (11C4349P01-LTLS) Engine Transport Stand for GEnx-2B

Features:

• Designed for ground transportation of GEnx-2B full-up engine or propulsor (for Deutsche Lufthansa AG)

• Install/remove fan stator case (with or without inlet) using the following Fan Separation Dolly (click on part number link below to find out more):

o 11C4348P01

• Compliant with GE Statement of Work design loads, dynamic loads, & interfaces
• Can be raised via forklift from either side & lifted by single or dual lift hoist systems

• Specific colors required for stand:

o Base color is RAL 5022 (night blue)
o Cradle color is RAL 1018 (zinc yellow)
o Tow bar color is RAL 2004 (pure orange)

Mobility:

• Supported by four (4) retractable caster assemblies
• Each caster assembly offers 5" wide x 16" diameter wheel for easy mobility & weight capacity of 6,500 LBS each
• Standard shock-absorbing polyurethane tread wheels, position locks, & face brakes
• Caster assemblies designed to pin in elevated position for truck transport of entire stand
• Towable from aft end only (with fan inlet cowl)
• Maximum towing speed of 8 Km/h or 5 MPH

Dimensions & Weight:

• Without Engine: 199.32” (Length) x 96” (Width) x 83.87” (Height*) / 5,500 LBS
• With GEnx-2B Engine: 199.32” (Length) x 120” (Width) x 137.40” (Height*) / 20,100 LBS

*Casters stowed (add 3” for casters deployed)

View other product photos:
© 2020 AGSE LLC. All rights reserved. Site design: Moraes Incorporated
Product Inquiry: 0 item(s) added
Review My ListClose My List