My Request List
Review My ListClose My List
0 item(s) added

My bookmarks

You have not yet added any products to your product list.

AGSE Product Form

Fill in the blank.

AGSE-E176-G06/-G07 Engine Transport Stand for GEnx-1B & GEnx-2B


• Designed for single truck transport that can easily be converted to support either GEnx-1B or GEnx-2B production full engines with or without inlet
• Compliant with GE Statements of Work for static design loads, maximum dynamic loads, & engine GSE interface points
• May be lifted (with or without full engine) by single or dual lift point slings and by forklift
• Can be used for fan separation/mate & propulsor only truck transport (with additional tooling)


• Supported by four (4) retractable caster assemblies
• Each caster assembly offers 5" wide x 16" diameter wheel for easy mobility & weight capacity of 6,500 LBS each
• Shock-absorbing polyurethane tread wheels, position locks, & face brakes
• Caster assemblies designed to pin in elevated position for truck transport
• Towable from aft end only (with fan inlet cowl)
• Maximum towing speed of 8 Km/h or 5 MPH

Dimensions & Weight:

Without Engine: 194” (Length*) x 99” (Width) x 72.5” / 80.7”*** (Height**) / 5,500 LBS
With Bare GEnx-1B Engine: 194” (Length*) x 139.4” (Width) x 139.3” (Height**) / 19,000 LBS
With Bare GEnx-2B Engine: 194” (Length*) x 128.4” (Width) x 133.4” (Height**) / 17,900 LBS

*Casters stowed
**Add 3” for casters down
***GEnx-2B configuration

View other product photos:
© 2020 AGSE LLC. All rights reserved. Site design: Moraes Incorporated
Product Inquiry: 0 item(s) added
Review My ListClose My List