Request Quote/Info
Review My ListClose My List
0 item(s) added

My bookmarks

You have not yet added any products to your product list.

AGSE Product Form

Image CAPTCHA
Enter the characters shown in the image.

AM-1196 DC-10 Center Engine Access Stand (Formerly AM-1013)

The AM-1196 Center Engine Stand was designed to provide access to the number two engine with the tail cone up or down and with the patio doors open. With the tail cone up and the doors open, slider sections (8-1/2" in width) can be extended out from the cutout section of the platform to contour around the doors. These sliders are deployed by using a "T" bar and have a protective bumper as does the front edge of the cutout area. When the tail cone is lowered a center rolling platform can be moved forward, from its stowed position at the rear of the platform, to cover up the cutout and provide a solid work surface 23' in width. A forward safety barrier is supplied for added protection while mechanics are working near the front edge of the stand and at a height where standard handrails do not provide adequate protection against a fall. The barrier is a parallelogram structure on which a safety ne has been attached. After an aircraft has been docked a mechanic can swing the safety barrier inboard. A rubber pad fastened to a foot supports the frame against the skin forward of the firewall. On each inboard side of the safety net along strap with buckle assembly has been provided and can be attached to a harness hard point on the forward patio wall and drawn tight keeping the safety barrier against the aircraft. A slotted bar keeps the barrier upright and in a stowed, outboard position.
The platform elevation is adjustable and is set at an approximate 24' during erection. Should the stand require future adjustment, lever arm hoist (Tuggits, Coffing, etc.) from airline bootstrap kits can be utilized and attached to lugs located on each leg, Adjustment is accomplished by cranking the lever arm hoist up, removing four (4) SS pins and re-pinning at the desired elevation.

View other product photos:
© 2018 AGSE LLC. All rights reserved. Site design: Moraes Incorporated
Product Inquiry: 0 item(s) added
Review My ListClose My List
Understood